DRYER ERROR CODES
Error codes d80, d90, or d95 indicates that the airflow is restricted somewhere between the dryer and the outside exhaust exit. this is typically a signal to have the yearly vent cleaning completed by a professional vent cleaner.
nP error code indicates there is no current being detected at the heater. This normally indicates a problem with the electrical wiring in the home.
PS error code indicates that there is improper voltage with the power cord, which could be caused by the white and red wire connections being reversed on the dryer's terminal block.
tE2 error code on the display indicates a problem was detected with the dryer's thermistor, normally during cold conditions. This error code can occur during the SteamFresh™, Steam Sanitary™, or Steam Option, due to the duct cooling down too quickly.
FO error or a flashing INSERT FILTER on the dryer's display indicates that the lint filter should be checked to ensure that it is inserted properly.
H5 error code on the dryer's display indicates that the dryer has detected an error with the HUMIDITY SENSOR.
PF error code usually happens after a power outage. To fix it, we're going to do a factory reset. Unplug the dryer or trip the circuit breaker supplying power to the dryer off. While the dryer is without power, press and hold the Start/Pause button for 5 sec. Restore power and try to run a cycle.
tE1, tE3 or tE4 error code on the display of the dryer indicates a problem was detected with the dryer's thermistor.
Add Water or E05 error code indicates that there is a water supply error.
Before using a steam cycle, the steam feeder must be filled with water up to the MAX indicator lines. Check the steam feeder to be sure that it is full of water and that the drawer is completely closed.
dHE error code indicates the unit had a temporary dry function error.
nE error indicates a problem with the connection between the control panel and the Wi-Fi module of the unit.
nF error code indicates a problem with the Wi-Fi module on the unit.
dE error code means that the dryer door is not completely closed.